In this guide, we walk you through the methods to resolve the Cricut Explore Air 2 not cutting issues properly. Learn everything from checking blade condition to changing pressure settings. Read further to learn more.
Solutions: Cricut Explore Air 2 Not Cutting Properly Issue
Is your Cricut Explore Air 2 not cutting like it is supposed to? Here are some troubleshooting solutions to this issue. Let’s check them out:
Step 1: Make sure that the material setting you choose in the Design Space is similar to your material. If your Smart Set Dial is set to Custom in the Cricut Explore models, check that the Custom Materials list has already been selected.
Step 2: Then, open Clamp B and remove the blade holder from the machine. Make sure that you are using a Cricut brand blade. Check the blade holder and clear all the dirt buildup within it. After cleaning the holder, clear all the filth and waste buildup on its sides.
Step 3: If it still does not work, raise the pressure on your material. You can do this by changing the settings by 2-4 and opening Manage Custom Materials.
Also read:- How to Setup Cricut Joy Machine?
Step 4: To see a difference in the cutting outcome, change the pressure settings 2-3 times in augmentations of 2 to 4.
Step 5: Cut another kind of material, such as printer paper, or use any other suitable setting for the material. If the outcome is similar, there may be an issue with the source material you are trying to cut.
Step 6: Try restoring the blade you are using with a new Cricut blade. The blade might have turned dull, and it now requires replacement. You can replace it with a new strap and sharp blade that solves most problems.
Conclusion
This guide covers everything related to resolving the Cricut Explore Air 2 not cutting issues properly. We hope you found it helpful. Now, you have the right solution. If the problem persists and things become much more complicated, you can contact a reliable expert.
