Cricut Maker 3 Blinking Red Power Light

Let us know, since how long have you been facing this error/issue:

First time

Since last week

More than 15 days

Do not know

A blinking red power light on a Maker 3 indicates a connection issue or another minor glitch within the machine. During this error, the machine can make grinding noises and stop cutting in the middle. This error can be caused by any of these reasons:

Using the wrong material with Maker 3
Stuck paper in the machine
Leftover materials inside the machine

Here is how to fix this error.

Step 1: Move the Side Bar Side to Side

Sometimes, any paper stuck in the sidebar can cause a blinking power light issue. A sidebar is the tool at the front that moves to cut materials. You can move it side to side with your hands. Doing this will loosen up any stuck paper or material.

Step 2: Close the Design Space

Close the Design Space window by clicking the cross button at the top right corner. Then, click Quit to confirm closing the software.

Step 3: Hard Reset Your Machine

A hard reset brings your Cricut Maker 3 to its original factory settings. It’s a great way to troubleshoot a red blinking light. Check how to do it: Note: Maker 3 doesn’t have a physical reset button. Hold the power button and the arrow button on the machine for five seconds. The power button will then display a solid red light, and the arrow button will display a solid white light. Then, wait for some time, and the power button will stop blinking red light.

Step 4: Open Design Space and Update Firmware

Launch the Design Space app on the computer.
Click the three horizontal white bars at the top left corner of the Design Space window.
Select Update Firmware from the expanded options.
Select the Smart cutting machine when it asks for your product type.
Click on Cricut Maker 3 from the list of machines.
Proceed with the screen and select your connection type.
Click the Update button to start updating firmware.
Lastly, click “Done” to complete the process.

That’s how you can stop the blinking red power light. Ensure that you don’t unplug your devices during this process.

Maker 3 Still Showing a Blinking Red Power Light!

Solution: Clean the Maker 3 from the inside

The Maker 3 might have an obstruction inside. Continue with the steps below to clean the machine.

Step 1: Turn Off the Maker 3

Unplug the Maker 3 from the power outlet on the wall.
Press and hold the power button to turn off the machine.

Step 2: Open the Front Door of Maker 3

Lift the lid at the front to open the door. Now, you can see the carriage system where the blades and pens are located.

Step 3: Clean the Carriage System

The carriage is movable. Move it left and right with your hands.
If it’s not moving smoothly, clean the carriage with a cloth.
Check for any leftover material that may be stuck inside the carriage. If present, remove it with your hands or use tweezers.

Step 4: Close the Machine’s Front Cover

Once you clear the carriage, you can close the front door by slightly pushing it down.

Step 5: Turn the Machine Back On

Reconnect the machine’s power cable to the main power supply.
Then, press and hold the power button on the machine.

Cricut Maker 3 Issue

Frequently Asked Questions (FAQs)

Why Is My Cricut Maker Showing a Blinking Red Power Light?

Usually, the reason behind a blinking red power light is a stuck paper inside the machine. Sometimes, it can be an internal issue, such as dirt buildup inside the machine.

How Do I Fix the Blinking Red Power Light on My Maker 3?

To fix the blinking red power light on the Maker 3, take the following steps:

Restart the Maker 3 and the computer.
Hard reset the Maker 3 and close the Design Space.
Reopen the Design Space and update the firmware.
Clean the machine’s carriage system.

Is There a Reset Button on the Cricut Maker 3?

No, there is no physical button on the Cricut Maker 3. To reset, you’ll have to use the power and arrow buttons on the machine. To reset, hold both buttons for at least 5 seconds and release.