Reset Cricut Mug Press
Let us know, since how long have you been facing this error/issue:
First time
Since last week
More than 15 days
Do not know
Resetting a Cricut Mug Press restores its default settings. If the machine is experiencing technical issues or is not functioning properly, a reset is a good option. However, it should be noted that the Heat Press doesn’t have a dedicated reset button, so users need to reset it via Design Space. Here is how to reset it step-by-step.
Step 1: Turn Off the Mug Press
- Press and hold the power button on the Mug Press until the light turns off.
- Disconnect the machine’s power cord from the power source.
- Connect the heat press to a computer via a USB cable.
Step 2: Open the Design Space
Launch the Design Space on your computer and sign in to the Cricut account using the right credentials.
Step 3: Add the Cricut Mug Press
Follow these steps to add a Mug Press in the Design Space:
- Go to the menu in the Design Space at the top, and select New Machine Setup.
- Select Heat Press and then select Cricut Mug Press from the list of devices.
Finally, the Design Space will recognize your Mug Press, and it will be reset.
Step 4: Turn On the Mug Press
- Reconnect the machine’s power cable to the power source at the wall.
- Press and hold the power button on the machine to turn it on again.
The solid green light will indicate the machine is powered on. However, users may encounter some problems while resetting their Mug Press, such as Design Space not recognizing the heat press or shutting down during reset. You can fix these problems using the methods below.
Problem 1: Design Space Not Recognizing Mug Press
It’s a common problem during restarting a Mug Press. As the heat press gets restored to its default settings, minor issues may arise. However, there could be more reasons behind this issue, such as:
- Outdated version of the Design Space.
- Power or connection issues with the machine.
Solution 1: Check the Power Connections
If the Design Space doesn’t detect the Mug Press, it may not be well connected to the computer or the power supply. Hence, check if the heat press is connected to a power supply and a computer.
Also, check the USB Cable between the two devices. If the USB cable is loosely connected, replace it with a new one.
Solution 2: Update the Design Space
When the Design Space is outdated, the Mug Press needs to be reset. Therefore, reset it using the steps given below.
- Click on your profile picture at the top right corner and select Settings.
- Select the Check for Updates option.
- If there is an update available for the Design Space, select it and click the Update or Install button.
Problem 2: Mug Press Shutting Down After Reset
If the machine shuts down after a reset, it might overheat. It has an auto-turn-off feature upon overheating. In this situation, follow the given methods:
- Ensure that the Mug Press is placed in a well-ventilated area.
- Let the Mug Press cool completely and reach room temperature.
- Finally, try resetting again.
Frequently Asked Questions (FAQs)
As the name suggests, reset restores the machine’s settings to the factory settings to resolve the common technical glitches. It’s a recommended method to troubleshoot a Mug Press. To reset a heat press, first, you need to unplug the machine and replug it after 30 seconds.
Usually, a Mug Press is reset when it’s experiencing technical difficulties, such as an inability to work, not heating, or transferring the design on the mug. Even when the machine is flashing a red power light, a reset method is ideal.
No, a Mug Press doesn’t have a physical reset button. Users can reset it using the Design Space. To reset the heat press, first turn it off and then turn it back on. Also, add the Mug Press in the Design Space using the Settings option.
