Cricut Maker Cutting Blade is Stuck

If the cutting blade is stuck in the Cricut Maker, it won’t cut designs properly and may stop mid-operation due to restricted movement. You will notice a “Blade is Stuck” error message on Cricut Design Space. When you attempt to cut, draw, or perform other operations, the error message appears. The issue may arise due to dirt accumulation, which prevents the blade from functioning properly. Also, an improperly set blade can get stuck and hinder the machine’s operation. However, there are some easy methods to resolve this error.

Solution 1: Restart the Machine

Restarting the Cricut Maker machine is a basic step to fix blade issues. It can resolve various problems, including a stuck blade. To restart the machine:

1. First, press and hold the power button on the top right until the machine powers off.
2. Unplug the cable that connects the machine to the power supply at the wall outlet.
3. Wait for 1-2 minutes, and then reconnect the power cable.
4. Finally, press and hold the power button on the machine until the light turns on.

Now, test the blade to see if it works. If the issue still persists, move on to the next solution.

Are the Blades Inserted Correctly?

It is important to understand that the Cricut Maker’s two clamps – Clamp A and Clamp B are designed for different tools. Most of the cutting blades fit into Clamp B, while Clamp A is for pens and markers. An incorrectly positioned blade may not function properly and could trigger error messages. Yes: You can move on to the next method. No: If you haven’t put the blades in the right clamps, you should check them and put them in the right clamps.

Solution 2: Check Blade Position

The position of the blade is as important as using the correct blade. Ensure the blades are properly aligned in their respective clamps.

Step 1: Open the Clamp B 

The Cricut Maker has two blade clamps at the front – Clamp A and Clamp B. You need to open Clamp B (the right clamp) by gently pulling out the grey latch, which holds the blade in place.

Step 2: Check Inside the Clamp

Next, check if the blade fits properly into the clamp. It should not be loose, and the lip of the blade (the top part of the blade) must align with the clamp. The lip should sit flat on the clamp, not above it.

Step 3: Remove and Reinsert the Blade

To ensure its correct position, lift the blade from the clamp and reinsert it until it clicks securely into place.

Did You Find the Blade Dirty? 

A dirty blade is another common cause of a stuck blade in the Cricut Maker. If the blades appear dirty when you open the clamp, you will need to clean them. Follow these steps to clean the blades:

Step 1: Remove the Blades 

In the first step, open Clamp B by gently pulling out the grey cover. Then, carefully remove the blade from its position.

Step 2: Clean the Blades 

When you take out the blades, clean them with a damp cloth or use rubbing alcohol to remove debris.