Cricut Maker Firmware Update Issue

A firmware update is necessary for the Cricut Maker machine. It is software that manages the basic operations of the machine. When the machine doesn’t function properly, it needs a firmware update. If your machine lags in between or freezes, the firmware can be outdated. Also, if your machine doesn’t cut appropriately or produce misaligned cuts, you can update the firmware.

How to Update Firmware for Cricut Maker?

Step 1: Check if Devices Are Turned On

First, make sure that your devices, such as your computer and machine, are turned on and connected to the power supply at the wall outlet. Also, check if your devices are connected well to the USB cable.

Step 2: Open the Cricut Design Space 

When you are sure that your devices are connected to the wall outlet and to the USB cable, open the Design Space software on your computer.

Step 3: Download & Install the Firmware 

In this step, you must check the option for a firmware update on the Design Space software. Check out the steps below to start an update:

Download: 

1. Usually, the software will pop up the firmware update option if it is necessary to update.
2. Otherwise, you can go to the top left menu of the Design Space and select the Firmware Update option.
3. Don’t unplug or turn off your devices until the firmware update finishes.
4. Let it download to your computer in the Downloads folder.

Install: 

1. Go to your Downloads folder on the computer.
2. Then, double-click on the downloaded file.
3. Now, a confirmation message will ask you to run this software; click Run.
4. Finally, an installation page will appear, and the firmware will install.

This is how you can update the latest firmware for your Cricut Maker cutting machine.

What if You Can’t Update the Firmware?

It is possible that you tried to update the firmware, but it shows some problems. For example, the computer says, “Failed firmware update,” “Update could not be completed,” etc. Moreover, you click the update button over and over again, but nothing happens. In this case, you need some basic troubleshooting methods to fix this.

Solution 1: Restart the Computer 

It is possible that you have been using the computer for a long time, and now it is lagging because of overuse. Hence, a restart will refresh its functions. Check how to do it:

1. First of all, click the Start button on the PC’s taskbar.
2. Then, click the power button, a circular icon, and then click Restart from the menu.

Let the computer restart, and then try updating the firmware again.

Solution 2: Use a Different USB Port 

When you can’t update the firmware, the problem can lie in the connection. Since you use a USB connection, there is a chance that this connection is faulty.

1. Unplug the USB cables from the devices and re-plug the cables.
2. Also, check if the cable was loosely connected or is broken.
3. If you find the USB cable damaged, replace the cable.
4. You can also use a different port to connect the USB cable.

These solutions will help you update firmware correctly. Once you update the firmware, your software will start functioning properly.