Reset Cricut Joy
Let us know, since how long have you been facing this error/issue:
First time
Since last week
More than 15 days
Do not know
When we reset Cricut Joy, it restores the machine to its original settings. It is useful when the machine doesn’t connect to a device properly or experiences technical glitches. Note that a Cricut Joy doesn’t have a physical reset button, and you’ll need to power reset it. Here is how to do it:
- Power off the machine by pressing and holding the power button until the power light stops flashing.
- Disconnect the machine’s power cable from the wall outlet.
- Gently move the carriage of the machine located at the front about 5-6 times manually to remove any dirt and debris.
- Wait for 1-2 minutes and reconnect the power cable to the wall outlet.
- Finally, press and hold the power button to turn on the machine.
However, the machine can experience certain problems after a reset, including problems with connection and incorrect material selection. It is very normal to happen. Check out the methods to troubleshoot these issues.
Problem 1: Problem With Bluetooth Connection
Sometimes, a reset to the Cricut Joy may cause temporary Bluetooth connection issues between the devices. This is the most common issue because the machine fails to recognize your phone or computer after a reset.
Solution: Remove and Re-Establish the Bluetooth Connection
- Keep the Cricut Joy within a distance of 10-15 feet of the device.
- Ensure that the machine is fully turned on.
- Click the Start button on the computer and search for Settings.
- Then, select Bluetooth & Devices, and click the Remove option next to Cricut Joy.
- Select the machine again from the list of available devices, and enter the PIN as “0000.”
- Similarly, if you’re using a phone, go to Bluetooth Settings and remove the Cricut Joy.
- Then, reconnect it to the machine.
Problem 2: Design Space Not Detecting Cricut Joy
After the reset, the Design Space software sometimes doesn’t detect the Cricut Joy machine. It can be resolved by the following methods.
Solution 1: Restart the Cricut Joy and the Device
Design Space fails to detect the Cricut Joy due to a minor technical issue with the device. Restart the devices using these steps:
- Disconnect the power cable of the machine, wait for 30 seconds, and reconnect it.
- On the computer, go to the Start Menu and click the power button.
- Select the Restart button, and wait until the computer restarts.
Solution 2: Unpair and Re-Pair the Cricut Joy
When the Design Space doesn’t detect the Cricut Joy, re-establish the connection using these steps:
- Click the Start icon on the Windows computer and search for Settings.
- Select Bluetooth & Devices, and click the Remove option next to the Cricut Joy.
- Wait for a few minutes, then select the machine from the device list.
- Similarly, if you’re using a smartphone, go to Bluetooth settings, remove the machine, and reconnect after a few minutes.
Frequently Asked Questions (FAQs)
A Cricut Joy requires a reset when experiencing technical issues, connection problems, or improper cutting. Users need to power reset the machine as it doesn’t have a physical reset button. After a reset, its original functions are restored.
Problems after a reset in the Cricut Joy usually occur due to technical glitches in the machine or the device, or connection issues in the machine. The problem can also occur if the machine is not powered on properly or if the firmware update was incomplete.
If the Design Space is not recognizing your machine reset, it could be due to connectivity issues. Once you reset the machine, it slowly gets back to its original functionality, and sometimes it loses connection to the computer or Design Space.
